Hendi Arktic 271575 Mode D'emploi page 8

2) Operation panel
A. "Add water" light: When the light flashes, it
means the water is supplied to slow; and
when the light is on always, it means absence
of water in unit.
B. "Timer" light: When this light is on, it means
the TIMER is set. Timer can be set on or off
with the clean/timer button.
C. "Ice" light: If the light is on, means the unit is
making ice; And if the light flashes, means the
unit is during the ice-harvest process.
D. "Full" light: When the unit is full of the ice
cube, the light will be on.
E. "Clean" light: When this light is on, water
pump cleaning start. When the light flashes,
EN
water pump cleaning stop.
F. & button: Use to adjust the ice-mak-
ing process duration period length, the default
setting is zero, 1 minute adding or decreasing
per each pressing of
adjust the delay time of the timer, the default
setting is zero, 1 hour adding or decreasing
per each pressing of
8
or button. Also to
or button.
G. LED Display: At normal condition, the number
in the window is always on, it displays the am-
bient temperature; And if the number flashes,
it will display the time left in minutes of each
process, like ice-making cycle, self-cleaning
program, etc.
H. " " ("On/Off") button: When the unit is off,
press this button to turn on the unit; And
during the Self-cleaning program, or normal
ice-making state, press this button to turn
off the unit at once; And also if the unit is set
with the Timer, press this button to cancel the
Timer setting. When the unit is making the ice
cube, press this button for more than 5 sec-
onds, the unit will switch to ice harvest pro-
cess by force.
I. " " ("Timer clean") button: Quickly press this
button once, to enter the Timer setting pro-
gram; And press this button for more than 5
seconds when the machine is off, to enter the
Cleaning program.