Important Notes; Application; Technical Specifications - Franke AQCT0064 Notice De Montage Et De Mise En Service

4.

Important notes

• Installation, commissioning and maintenance are to be performed only by a
qualified expert in accordance with the instructions provided, legal requirements
and recognised engineering standards.
• All technical connection regulations specified by the local water and electricity
supply companies must be observed.
• The battery compartment with battery or power supply with extension cable must
be ordered separately (see Accessories,
• All work must be carried out in a de-energised state.
• We reserve the right to make changes.
5.

Application

AQUACONTACT - a stainless steel shower panel for wall mounting with electronic
time control for battery or mains operation, with DN15 thermostat battery. For
connection to hot and cold water supply. 30 second flow time.
With a device for an optional bypass solenoid valve cartridge for carrying out thermal
disinfection, with the option of manual thermal disinfection.
With integrated hygiene flush (24h after last actuation, for 10s). Functions which can
be activated via reflection code on sensor: Activation/deactivation of hygiene flush
and cleaning switch-off (3 min.).
Additional functions via optional remote control
– Adjustment of flow and interval times for hygiene flush
– Switch from time control to body reflection, maximum flow time of 300 seconds
– Program-controlled thermal disinfection with safety switch-off
6.

Technical specifications

Minimum flow pressure:
Recommended flow pressure:
Maximum operating pressure:
Calculated flow rate:
Volumetric flow:
Fitting:
Bypass:
Flow duration:
Operating voltage:
Power consumption:
Protection class:
Chapter 28).
1.0 bar
1-5 bar
10 bar
0.15 l/s 0.15 l/s
0.20 l/s at a flow pressure of 3 bar
0.06 l/s at a flow pressure of 3 bar
30 s
6 V DC
1.5 W
IP 67
- 5 -