Important Notes; Application; Technical Specifications - Franke AQUACONTACT AQCT0029 Notice De Montage Et De Mise En Service

4.

Important notes

• Installation, commissioning and maintenance are to be performed only by a
qualified expert in accordance with the provided instructions, legal requirements,
and the recognised engineering standards.
• All technical connection regulations specified by the local water and electricity
supply companies must be observed.
• The battery compartment with battery or power supply with extension cable must
be ordered separately (see Accessories,
• We reserve the right to make changes.
5.

Application

AQUACONTACT - shower panel made of MIRANIT-S solid-surface material for wall
mounting with electronic time control for battery or mains operation. For connection
to premixed hot water or cold water.
30-second flow time.
With integrated hygiene flush (24h after last actuation, for 10s). Functions which can
be activated via reflection code on sensor: Activation/deactivation of hygiene flush
and cleaning switch-off (3 min.).
Additional functions via optional remote control
– Setting the flow and interval times
– Switch from time control to body reflection, maximum flow time of 300 seconds
– Program-controlled thermal disinfection with safety switch-off
6.

Technical specifications

Minimum flow pressure:
Recommended flow pressure:
Maximum operating pressure:
Calculation of flow rate:
Operating voltage:
Power consumption:
Protection class:
chapter 24).
1.5 bar
1,5-5 bar
10 bar
0.20 l/s
6 V DC
1.5 W
IP 67
5