Control Elements - Dometic PERFECTPOWER PP 1002 Instructions De Montage Et De Service

Masquer les pouces Voir aussi pour PERFECTPOWER PP 1002:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
PerfectPower
The device is equipped at delivery with galvanic isolation. For the safe operation of
multiple consumers, it is essential that a circuit breaker (residual current circuit
breaker) is built into the socket distribution circuit and the grounding bridge is set in
the inverter.
I
NOTE
Note when connecting devices with an electrical drive (such as power
drills and refrigerators), that they often need more power than is stated
on the type plate.
The inverter can be switched on manually or using a remote control.
Cooling is provided by a fan and is load-dependent.
7.1

Control elements

I
NOTE
The version for continental Europe is pictured.
Front view (fig. 1, page 3)
No.
Description
1
Grid: This LED lights up if the inverter is supplied with external 230 V mains
power; the priority circuit is active.
2
Connection for the external 230 V power supply
3
Circuit breaker: Fuse
4
230 Vw output
5
POWER: This LED lights up when the inverter is switched on.
6
OLP: This LED lights up when the consumers connected draw too much
electricity.
7
UVP: This LED lights up when battery capacity is too weak.
8
OVP: This LED lights up when the input voltage is too high.
EN
Technical description
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Perfectpower pp 1004Perfectpower pp 2002Perfectpower pp 2004

Table des Matières