Control Elements - Dometic Waeco SinePower MSI2312T Instructions De Montage Et De Service

Technical description
I
NOTE
The individual values are found in the chapter "Technical data" on
page 54.
The inverters have a 230 Vw socket and a connection terminal for perma-
nent connection.
Due to the voltage synchronisation with the AC input voltage, the inverter is
suitable for operating sensitive consumers which react to an irregular voltage
supply.
The device can also be configured with a PC via an RS 232 interface and us-
ing the DIP switches on the device.
The inverter can be switched to an energy-saving mode to prevent the con-
nected battery from discharging too quickly.
Parallel operation allows up to three inverters (of the same model) to run at
the same time.
The inverter can be easily controlled using the remote control (accessory).
7.1

Control elements

Control elements of the inverter (fig. 5, page 4)
Item Description
1 Dip switch
2 LED
3 Main switch
"ON/OFF/
REMOTE" switch:
4 Fuse
5 Grounding screw
40
Description
Makes settings on the inverter (such as
mains voltage, mains frequency, energy-
saving mode).
See chapter "Status indications" on
page 49
Switches the device on, off or to opera-
tion via the remote control (accessory)
Protects the inverter from overload.
The fuse can be pressed in again once it
has triggered.
Sets or removes the grounding bridge
SinePower
EN