Fresetting The Maintenance Alarm - Cassese MACH 5 Mode D'emploi

USER MANUAL
If you can't push down the protruding Wedge/driver blade, then put your hands on
top of the vertical column and give a shock down. An audible "clack" sound should
confirm the hammer is unlocked.
Try to apply procedure I.7.C
remove the distributor and be able to remove the jammed hammer. If the distributor
head can't be removed, apply again a shock down and try to remove the distributor.
7.F RESETTING THE MAINTENANCE ALARM
From the execution
menu, press MAIN
button to return the
main menu and
select SETTING
button.
Press the RAZ NAILS
ALARM button, a
keypad asking for a
code will come up.
7.G REMOVING THE SIDE PANELS
Allen Key N.3
In order to have an access to mechanical parts, it is imperative to remove the side
panel of the opposite side to the screen.
With the 3mm Allen Key, unscrew the 4 locking screws.
Then remove the side panel.
REMOVING THE DISTRIBUTOR HEAD (page 43) to
Never push with your finger on a protruding wedge, they are very sharpened!!!
Figure 7-13
Enter the code 5000
to reset the alarm
message.
MACH 5 CART
Figure 7-12
Figure 7-14
Figure 7-15
45