Cassese MACH 5 Mode D'emploi page 37

USER MANUAL
Deleting blank articles:
When deleting a file the machine will keep a blank allocation in the list of the articles,
if you wish to have a continuous list and remove these blank articles, use that
DELETE ARTICLE BLANK button. Refer to procedure of Figure 6-23 prior to launch
this procedure in order to reduce the treatment time.
You will be asked for a code, enter 0271 to get access to that function. Once the
setting is done, turn off the machine to lock back the parameters.
Protecting the database:
You can prevent operators from modifying the recorded files, press MODIF BASE
ENABLE to allow or not this modification.
At this time it is still possible to program some new job, without storing them, if you
want operators to use only what is in the memory, press button MODIF EXEC
ENABLE to allow them or not to do that.
You will be asked for a code, enter 0271 to get access to that function. Once the
setting is done, turn off the machine to lock back the parameters.
Exporting database:
USB key fat32 1Giga mini
Allen key N.3
It is possible to
export your files to a
USB key so you can
save your database
or transfer them to
another machine.
Prior to do this,
switch off the
machine and unplug
it.
Remove these 2 back
screws .
Open the top cover
and plug your usb
key at the back of the
screen.
Put back the screen
in normal position
and plug back the
machine.
Remove these 2 front
screws
Figure 6-27
Go in setting screen
page 5 and press
button EXPORT TO
USB.
process
finished.
Press REMOVE USB
before
your key.
Then put back in
place top cover and
screws.
Figure 6-29
Wait for
to be
to unplug
MACH 5 CART
Figure 6-25
Figure 6-26
Figure 6-28
Figure 6-30
37