To turn on your device, press the
Power on key (E).
If the screen backlighting is not active,
press any button to reactive it.
If the screen is not lit up, press any button to activate the screen lighting.
To put your device in standby mode,
hold the Standby key (E) down.
You can run your device in several modes:
- Comfort mode (
- Eco mode (
) which enables you to lower the temperature in your room when you will be away from your home
for a long time or during the night, especially in bedrooms.
PROG
- The Programming
is used, using programs P1, P2, P3 or using a (centralised) programming system.
- Frost mode (
) which enables you to maintain a temperature of around 7°C during an absence of more than
24 hours, for example.
T
URNING IN YOUR DEVICE
A
CTIVING THE SCREEN
P
UTTING YOUR DEVICE IN STANDBY MODE
C
HOOSING YOUR HEATING MODE
) which enables you to have the right ambient temperature.
mode, where you can program the Comfort and Eco modes depending on when the room
Use
E
The device displays the 'comfort' temperature.
When first turned on, the device is set to Comfort
mode at 19°C.
You can now press the appropriate button for
the setting you want to make.
E
The panel displays
25
GB
then turns off.