Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1/ Setting the time
Turn the knob to
the days blink and press + or – to choose the day of the week
(1. Monday, 2.Tuesday, 3.Wednesday. ......7.Sunday)
Press OK to confirm.
The hour blinks and press + or - to set it and press OK to confirm
Do the same thing for the minutes.
2/ Setting the temperatures
Turn the button on :
- Frost Protection (
5°C to 15°C, 7°C by default),
- Eco (
) to set the energy-saving temperature (from 10°C to 30°C,
15°C by default),
- Comfort (
) o set the comfort temperature (from 10°C to 30°C,
19°C by default),
Choose using + or -.
Turn the knob to exit the setting mode.
3/ Programming (PROG)
When the device is first started up, the "Comfort from 6h to 23h" program is applied to every day of the week.
To change the setting,
turn the knob to PROG.
The 1st time slot blinks.
Press Eco or comfort, depending on how you want to program your device.
To apply the same program to the next day, hold the OK button down for about 3 seconds until the next day's
program appears.
Otherwise, press OK once and program the following days as you want.
Turn the knob to exit the programming mode.
Program hour
1st
hour
Economy
1h
Confort
1h
) to set the temperature when you are away (from
Day
Program
profil
Move to next
Validation
program period
and move to
next day
Use
24
Day
Hour
Minutes
Publicité
Chapitres
Table des Matières
