Parameters; 1/ Setting The Thermostat - Atlantic TIMELIS CHROME Notice D'utilisation Et D'installation

1/ Setting the thermostat

Turn the knob to Stop
H200 vx:xx is displayed (maintenance menu only to be used by the installer).
Press OK.
CF01 appears on the screen.
CF01 - Correction of the ambient temperature measurement
If there is a difference between the actual temperature in the room (thermometer)
and the temperature measured and displayed by the device, this menu can be used
to change the probe's measurement to compensate for this difference (from -4°C to
+4°C in 0.1°C steps).
Adjust the setting with + or - , then press OK to confirm and move onto the next
menu.
CF02 - Temperature display in AUTO mode
Displayedtemperature
Adjust the setting with + or - , then press OK to confirm and move onto the next
menu.
CF03 - Not Used
Press OK to move onto the next menu.

Parameters

and press the right button down for 5 seconds until
Real room
temperature
Instruction permanent display
21
GB
5 sec.