Atlantic Galapagos Notice D'utilisation Et D'installation page 31

To access the daily program,
press the Programming key (C).
a- You want to keep the selected program - Monday in the example
You want to keep the 'FP' pro-
gram for Monday: press the
Scroll key (E).
b- You want to change the selected program - Monday in the example
You want to change the 'FP' pro-
gram for Monday: press the +
(D) or - (F) key until the pro-
gram you want flashes on the
screen.
Y
OU WANT TO ASSIGN A DAILY PROGRAM TO ALL THE DAYS OF THE WEEK
Carry out the same procedure for all the days of the week, up until Sunday, either keeping the selected program or chan-
ging it.
Confirm the programs chosen
for each day of the week by
pressing the Scroll key (E).
N.B.: Even if there is a power cut, the settings are saved.
To activate the Programming
mode, press the Scroll key (E)
until the arrow is on this mode
.
PROG
N.B.: If the icon blinks, you need to check the day and time settings (see page 29).
H
OW TO ASSIGN A DAILY PROGRAM
Two solutions are possible :
a- you want to keep the selected program,
b- you want to change the selected program.
H
OW TO ACTIVATE THE PROGRAMMING MODE
C
For Monday, the 'FP' program is selected.
(J= day - LU = Monday - FP = programming control)
E
The program for Monday is confirmed. You can now se-
lect the program for Tuesday.
D
You have chosen the P3 program for Monday, you can
F
now confirm.
E
You have confirmed the daily programs. You must now
activate the Programming
E
The mode selection arrow flashes several seconds, then re-
mains on the display with the icon of the mode being pro-
grammed.
30
?
PROG mode.
?
PROG
PROG