Proper Installation - GE DCVH480EK Manuel D'utilisation Et D'installation

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal injury,
or death.
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.

PROPER INSTALLATION

This dryer must be properly installed and located in accordance with the Installation Instructions
before it is used. Installation Instructions are included in the back of this manual.
Properly ground dryer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
Install or store where it will not be exposed to
temperatures below freezing or exposed to
water or weather, which could cause permanent
damage and invalidate the warranty.
Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.
Remove all sharp packing items and dispose of
all shipping materials properly.
2
Installation and service must be
performed by a qualified installer
or service agency.
Exhaust/Ducting
1
Dryers MUST be exhausted to the outside to
prevent large amounts of moisture and lint from
being blown into the room.
2
Use only rigid metal 4" diameter ductwork inside
the dryer cabinet. Use only rigid metal or flexible
metal 4-in diameter ductwork for exhausting to
the outdoors. Never use plastic or other
combustible, easy-to-puncture ductwork.
For complete details, follow the Installation
Instructions.