Features; Assembly - Ryobi P506 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Motor ......................................................................18 V DC
Blade Diameter .......................................................5-1/2 in.
Blade Arbor .............................................................. 10 mm
KNOW YOUR LASER CIRCULAR SAW
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety
BEVEL ADJUSTMENT KNOB
The bevel adjustment knob allows you to set the circular
saw for bevel cuts from 0° to 50°.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
DEPTH ADJUSTMENT KNOB
The depth adjustment knob adjusts the depth of cut from
0 in. to 1-9/16 in.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

rules.

ASSEMBLY

Cutting Depth at 0º ...............................................1-9/16 in.
Cutting Depth at 45º ...............................................1-1/8 in.
No Load Speed ..................................... 4,700 r/min. (RPM)
LASER GUIDE
The laser guide will generate a red line on the work
surface in front of the saw when turned on.
LOCK-OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
SPINDLE LOCK BUTTON
The spindle lock button allows you to secure the blade when
turning the blade screw.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can
be used to measure up to 4 in. on the right side of the blade,
and up to 1 in. on the left side of the blade.
PACKING LIST
Circular Saw
5-1/2 in. Blade
Blade Wrench
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
7 - English