Sony PLS PIX1L Mode D'emploi page 111

3
Touch [Bluetooth].
The transfer screen appears.
4
Operate your Bluetooth-compatible device and send
the images.
For details on how to send the images, refer to the
operating instructions for your Bluetooth-compatible
device.
When selecting a printer on your Bluetooth-
compatible device, select "PLS PIX1L ##." The alpha
numeric characters comprising the right side of the
Bluetooth address displayed on the printer's screen
appear in place of "##." "CF" appears in place of "##"
in the following sample screen.
The unit receives the image data sent. The number of
received images appears on the unit's screen.
If your Bluetooth-compatible device requests a pass
1)
code entry, enter "0000."
1) The pass code may also be referred to by another
name, such as passkey or PIN code.
Note
You cannot change the pass code from the printer.
5
When the transfer is finished, touch the [OK] button.
When transferring multiple images, transfer all of the
images before touching the [OK] button.
The Main Menu appears.
The procedure following the Main Menu is the same as
when memory cards are used. See details on print
procedures starting on page 32.
Printing With Bluetooth® Communication
49