Image Editing - Sony PLS PIX1L Mode D'emploi

3
Insert the memory card into the respective slot on the
front side of the unit.
When the memory card is recognized, the Main Menu
appears.
4
Touch [Print All Images].
The order contents are shown.
5
Verify the order contents and enter the password.
For details on this operation, see "Verifying Order
Contents and Entering a Password" on page 35.
If the number of images on the memory card is higher than
the maximum allowable number of prints per order, the
image list screen will appear after the Main Menu, with the
number of images corresponding to the maximum number
being selected. You can then proceed to print these images,
or change the image selection.

Image Editing

The Edit Menu gives access to the following functions:
• Crop & Rotate (page 44)
• Color Adjustment (page 45)
• Sepia/Black&White printing (page 45)
• Red Eye Reduction (page 46)
The steps for image editing are described below.
1
Touch the [Edit] button.
The Edit Menu appears.
2
Touch the item you want to edit.
The respective editing screen appears. For details on
operation steps, see the later sections.
3
When finished editing, touch the [OK] button on the
respective editing screen.
The original screen reappears.
An edited image is indicated by a pencil symbol in the list
display.
To remove editing effects
You can return a temporarily edited image to its original
unedited state.
1
Select an edited image on the image list screen, and
touch the [Edit] button.
The Edit Menu appears.
2
Touch the [Reset] button.
A confirmation message appears. Touch the [Yes]
button.
The editing effects for the selected image are removed,
and the Edit Menu reappears.
43
Image Editing