Cleaning And Storage - Ayce FGD-36 Manuel D'utilisation

ASSEMBLING:
1. Remove the packaging materials
2. Assemble the two wheels as shown in the below images.
1
Front
Back
3. place of installation
For transport, use the special handle on the rear protective grille. Place the
product with the base supports on a dry, clean, horizontal and stable surface.
OPERATION:
1. Turning on / off and adjusting the benton speed
2. Connect the plug to a suitable outlet
3. Turn the knob on the back of the fan to turn on / off and set the fan rotation speed.
• 0 (Off)
• 1 (low speed)
• 2 (middle speed)
• 3 (high speed)
4. To turn off the bender, turn to the switch to 0.
3
2

CLEANING AND STORAGE:

1. Always disconnect from main socket before cleaning the
unit or air filter.
2. Avoid contact with moving parts.
3. Use only a soft and damp cloth to clean the unit.
4. Ensure that the fan is switched off from the supply mains
before removing the guard.
5. Do not clean the unit by spraying it or immersing it in
water or any other liquids and never allow water to drip
into the housing.
6. Do not use gasoline, paint thinner or other chemicals to
clean the unit.
7. Ensure that the unit is switched off from the main socket
before removing. Don't lift or move by pushing the unit
to prevent it from leaking. Always empty the water tank
and move the unit slowly. Be careful not to knock the unit
over!
8. Do not leave or store with water inside. Store the
appliance in its original box or cover the unit to protect it
from dust in a dry place if it is not being used for a long
period of time.
36 | 37 GB