Cleaning And Storage; Battery Mode - Ayce DC18 V Manuel D'utilisation

30°
60°
(2) Product can be up 15° and down 15° by manual.

Battery mode

Unplug the power cord from the product, Switch on the battery control button on
the base, press the " " on the control panel or remote control, you can hear "Bi,
Bi", and fan working. ( the fan with memory function and working at last setting).
If plug in the supply, the inside battery would be charged automatically. The
indicator light (green light) was flashing for charging and 4 LED indicator turning
to be on for full charging.
(Full charging time was about 6 hours from empty.)
Note: At the battery mode, after full charge, the DC fan would work about 15
hours with no swing & lowest speed setting.
Battery indication
Battery control button
90°
120°

CLEANING AND STORAGE

• Before cleaning the fan, please turn off the switch and pull out the plug.
• Please remove the front cover/back cover/blade of the fan with following the
below diagram to wash, after cleaning, please ensure the blade is dry and then
install it.
66 | 67
GB