Technical Data; Cleaning And Storage - Ayce KW-MF200 Manuel D'utilisation

e) Make sure the cord is completely
extended before use.
f ) Always unplug the fan in the places
where we store or use gasoline, paint
or other flammable liquids.
g) Do not place the fan directly on a metal
table or surface without insulator material.
This will cause troubles or malfunction
of the alluminium stand control. To avoid
any problem, insert a insulator material
with minimum 3cm thickness between
the fan stand and the metal surface.

TECHNICAL DATA

Model
Main Supply
Output
OPERATION:
Connect the USB cable with your FAN and computer or AC-DC
adaptor ( 5 V, 4.0W ). (the Micro USB cable in the package)
Touch the power switch to turn on/off the fan (Refer to the picture).
KW-MF200
5 V
4 W
• Touch once, Low wind speed, indicator light will be on.
• Touch twice, Middle wind speed
• Touch third, High wind speed
• Touch forth, turn off the fan, and indicator light will be off.
Angle adjustment
You can adjust the angel by yourself:
8-42 degrees range.

CLEANING AND STORAGE :

• Unplug the fan before cleaning.
• Use only a soft cloth to gently wipe the
fan clean.
• DO NOT immerse the fan in water and never
allow water to drip into the motor housing.
• For storage, clean the fan carefully as
instructed and store your fan in a cool dry
place.
38 | 39 GB