Storage; Environmental Management; Transportation - Belmash SDM-2000 Instructions D'utilisation Originales

BELMASH SDM-2000, 2200, 2500
Running machine generates
strong vibration
Running machine suddenly
stops
The saw blade cannot be
raised

14. STORAGE

Machines are designed for storage in closed or other naturally ventilated rooms without
artificially controlled climatic conditions where variations in temperature and air humidity is
substantially less than in the open air (such as stone, concrete, metal heat-insulated, and other
unheated warehouses, located in macroclimatic areas with moderate and frigid climates).
During storage, it is necessary to consider the labeling requirements on the individual package.
Store the machine out of the reach of children.

15. ENVIRONMENTAL MANAGEMENT

Never dispose of this machine and its parts together with unsorted municipal waste.
The machine parts made of aluminum and plastics are labeled to allow their sorting and
recycling.
Devices and tools of the machine, which have reached the end of their working life, must be
collected separately and recycled in an environmentally safe manner.

16. TRANSPORTATION

The machines are transported in closed vehicles.
The transportation of the machines is performed by two persons, holding the handles of the
package.
During transportation, it is necessary to comply with the labeling requirements on the individual
package.
To transport the machine without packaging, you should use the left and right cross guides
(fig. 1), and the wheel stand BELMASH PK-1.
Knives are improper or mounted
incorrectly
The saw blade is deformed
No voltage
Thermal protector actuates
Cutting depth adjustment handle 13
(figure 1) is not held in raised position
Adapt the knives ant fixation parts by
weight and adjust their position
Replace the saw blade
Check the voltage
Start the machine again in 15-20 minutes
Hold cutting depth adjustment handle while
raising/lowering the saw blade
EN
31