Safety Requirements - Belmash SDM-2000 Instructions D'utilisation Originales

EN

7. SAFETY REQUIREMENTS

Before operation, study the safety requirements. Follow all the requirements of
the present manual
Getting started the machine usage, the operator should consider his physical condition, level
of qualification and complexity of the tasks performed. Machine operation is allowed only for
personnel of 18-year age or older having studied the present operating manual.
IT'S PROHIBITED TO:
• work under the influence of alcohol, drugs or other intoxicants;
• operate the machine under the influence of water drops and splashes as well as in open
areas during the rain or snowfall;
• leave the machine connected to power line unattended;
• assign the machine operation to persons unable to use it properly;
• use the machine inappropriately;
• shape metals, asbestos-cement materials, stone, plastic, rubber etc.
IT'S PROHIBITED TO operate the machine in case of detection of any of the following
malfunctions during operation:
• damage of electrical cord plug connection;
• damage of grounding circuit;
• appearance of flaming insulation smell or smoke;
• switch malfunction;
• generation of noise, knocking or vibrations;
• malfunctions or cracking of machine parts, guards or cases.
The machine should be switched OFF in case of sudden stop (moving parts wedging etc.).
During work breaks the switch should be covered.
When connecting the machine use automatic circuit breaker or cutout fuse with rated operating
current of 16 A.
The machine should be disconnected from power line with plug connector in the following cases:
• tools replacement (saw blade, knives etc.), attachments mounting and adjustment;
• moving the machine from one place to another;
• during work breaks or after operation;
• during technical maintenance;
• when removing chips and saw dust.
The electrical cord of the machine should be protected from occasional damage (it's
recommended to hang it). Direct contact of electrical cord with hot and oiled surfaces is not
allowed.
When operating in open areas use only appropriate and properly marked extension cord.
Always ensure that the processed material is free from nails or other foreign objects.
Do not wear loose clothes and jewelry. It's prohibited to wear gloves during operation as they
may be entangled by moving machine parts. Use personal protective equipment and head wear.
To provide high-quality and safe operation, cutting parts of working tools should be sharpened
and clean. To replace the equipment, follow the present operating manual.
20