Troubleshooting; Storage; Environmental Management; Transportation - Belmash SDM-2000 Manuel D'instructions

EN
Possible malfunctions and ways of their detection and elimination are listed in the table 3.
Name of malfunction
and its signs
The powered ON machine
fails to start
Electric motor is
overheating
Motor is running but
cutter-block is not rotating
Running machine
generates strong vibration
Running machine suddenly
stops
Machines are designed for storage in closed or other naturally ventilated rooms without
artificially controlled climatic conditions where variations in temperature and air humidity
is substantially less than in the open air (such as stone, concrete, metal heat-insulated,
and other unheated warehouses, located in macroclimatic areas with moderate and frigid
climates).
It is necessary to pay attention to the labeling requirements on the individual packaging.
Keep the machine out of children's reach.

15. ENVIRONMENTAL MANAGEMENT

Plastic machine parts are appropriately marked which allows their separation and recycling.
The worn out parts and devices of the machine should undergo environmentally friendly
recycling.
The transportation of the machines is performed in closed vehicles.
The transportation of the machines is performed by two persons, holding the handles of the
package.
It is necessary to comply with the labeling requirements on individual packaging.
Never dispose this machine and its parts together with unsorted municipal waste.
The machine parts made of aluminum and plastics are labeled. That allows sorting and
recycling wastes.
Devices and tools of the machine, which have reached the end of their working life, must be
collected and disposed of separately from household waste material.
74

13. TROUBLESHOOTING

Possible reason
No voltage in power line
No contact between the socket and
the connecting cord plug
Switch is out of order
The machine is overloaded with
intensive supply
Wood is too moist
The belt is torn
Knives are improper or mounted
incorrectly
Saw blade is deformed
No voltage
Thermal protector actuates

14. STORAGE

16. TRANSPORTATION

17. POST-CONSUMER RECYCLING

Way of elimination
Check the power line voltage with any
other obviously working device
Eliminate the malfunction or replace the
plug
Eliminate the malfunction or replace the
switch
Reduce the processed material supply
Replace the blank
Replace the belt
Adapt the knives ant fixation parts by
weight and adjust their position
Replace the saw blade
Check the voltage
Start the machine again in 15-20 minutes
Table 3