Abus HomeTec Pro CFT3000 Mode D'emploi page 17

General settings
cancel/
exit
• When inserting the batteries, the ABUS logo appears for approx. 5 seconds; thereafter the
code field
• When waking the keyboard by knocking (5.2), the code field opens
• An acoustic feedback is given with each keyboard entry. Note: Signal can be turned off (5.3j).
• For the entry of a code number an
• Multiple incorrect code entries result in a temporary blocked entry status
• After approx. 120 seconds without entry, the system changes back to the code entry status
• Low/empty battery for drive and keyboard shown on the display as warning
• As soon as "Automatic Locking" is enabled, the keyboard queries the status of the drive
in a pre-determined period (approx. every 15 minutes). If a door is reported as unlocked
in this time, it is automatically locked again.
Entry of the Admin Code is
mandatory here!
ADMIN CODE:
confirm/
select
is created on the display, i.e. 5 (-10) digits
12345
0
Navigation
• To teach the keyboard correctly menu
a-e is required
• Optional configuration options offer
the menu f-j.
9
-
Digits
17