IWC Schaffhausen ingenieur chronograph Mode D'emploi page 27

a d j u s t I n g a n d s e t t I n g t h e M e t a l B r a C e l e t
The metal bracelet has been designed so that you can comfortably adjust it to the
size of your wrist. You can make this adjustment yourself by removing or adding indi-
vidual bracelet links. Furthermore, for your personal convenience, this bracelet has an
innovative fine-adjustment system, permitting you to extend or reduce the length of
the bracelet quite simply by up to 6 millimetres, depending on your needs. To increase
the length of bracelet, press the button with the IWC logo and pull the bracelet slightly
apart. To shorten it, push it together in the area of the clasp; here the button does not
need to be pressed.
t a k I n g t h e B r a C e l e t a p a r t
Open the folding clasp by pressing the buttons on the
side. Lay the bracelet with the outside on a firm base.
To avoid scratching the bracelet and base, place a cloth
underneath the bracelet. Using the special tool provided, you
can now push down the securing pin at the desired point of
separation (1) and, at the same time, slide the hinged link with
the help of the second tool about 3 millimetres sideways (2).
Pull the protruding hinged link out of the bracelet (3). The
bracelet is now separated.
I n g e n I e u r C h r o n o g r a p h
— 2 7 —