How To Connect The Antennae; Important; Audio Connection; Power Supply - Beyerdynamic MCW-D 50 Notice D'utilisation

MCW-D 50 – Control Unit

3.2.2 How to connect the Antennae

• Connect the receiving antennae to the antenna inputs A and B
• Connect the transmitting antenna to the antenna output
• For stand-alone operation we recommend using the CA 2411 angled rod antenna.
19

Important:

• There must be an unobstructed path between the microphone units and the antennae, i.e. between the MCW-D 50
control unit and the microphone units there must not be any obstacles. The range is around 30 - 50 m. For optimum
range the surface of the table is important, wood or plastic tables are ideal, but metal tables can cause interferences and reduce
the range.
• Please make sure that the minimum distance between the antennae and the microphone units is not less than 1 m.

3.2.3 Audio Connection

• Connect the XLR or RCA
15 11
• Always route cables running to the unit where they will not be pinched or cut by heavy or sharp objects.

3.2.4 Power Supply

• Verify that the voltage rating of the unit matches that of the AC mains outlet you are to use. If you connect the unit to the wrong
voltage, you may seriously damage it.
• Always route cables running to the unit where they will not be pinched or cut by heavy or sharp objects.
• Connect the MCW-D 50 control unit to the mains
between 100 V and 240 V at 50 - 60 Hz.
19
.
20
master output to the input of a mixing console/amplifier.
11
. The internal power supply unit of the control unit can adjust auto matically
18
.
20
15
35
19
18 18