Characteristic Curves - Festo HMPL- Série Notice D'utilisation

HMPL-...
Type
Permitted static tilting
torques (Mx = My) on the
piston rod of the HMPL-...
Materials
Approx. weight
– stroke = 0 mm
– per 10 mm stroke
*) During 100 consecutive strokes under constant operating conditions
**) Reference system see Chapter "Fitting mechanical components"
***) Mass does not increase linear with stroke
14

Characteristic curves

Festo HMPL-... 0005NH – English
12-...
0.7 Nm
**)
Cylinder profile, front plate,
end cover, bearing cover,
stop element profile:
Screws, piston rod:
Bolts, guide rod:
Dirt wiper:
Adhesives:
Pistons, O-rings, seals:
Plugs:
Viewing window:
***)
0.5 kg
0.04 kg
(at the end of the operating instructions)
16-... 20-...
1.5 Nm 2.5 Nm
Al
St
St (hardened)
P 5010
Loctite
NBR/PU
PA 6
PC
0.7 kg 1 kg
0.05 kg 0.07 kg
37