Accessories - Ryobi RTS22 Manuel D'utilisation

CLEANING THE RIVING KNIFE LOCK LEVER
PLATES
See Figure 57.
The locking lever on the riving knife may become difficult to
lock securely after extended use due to sawdust or debris
falling into the plates.
 Unplug the saw.
 Unlock the lever to remove the riving knife.
 Wipe the area with a clean dry cloth or use compressed
air to blow away debris.
 Reinstall the riving knife and turn the lever to lock the
riving knife in place.
WARNING:
Do not use the saw if the lock lever does not fully close.
Failure to do so may cause serious personal injury.
Look for these accessories where you purchased this product or call 1-800-525-2579:
 Dado Throat Plate .......................................................................................................................................089037011021
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
MAINTENANCE
PLATES

ACCESSORIES

45 - English
RIVING
KNIFE
LOCK
LEVER
Fig. 57