Machine Description; Technical Data; Environment - Belle Group RPC60 Manuel De L'opérateur

3
2
5
Model
Engine - Hatz 1D81Z Diesel (Hp)
Engine - Hatz 1D81Z Diesel Electric Start (Hp)
Weight - Hatz 1D81Z Diesel (lbs)
Weight - Hatz 1D81Z Diesel Electric Start (lbs)
Engine RPM - Hatz
Centrifugal Force (kN)
Frequency (Hz)
Maximum Travel Speed (ft/min)
Sound Power (dB(A))
* Minimum level to En500 Part 4
Safe Disposal.
Instructions for the protection of the environment. The
machine contains valuable materials. Take the
discarded apparatus and accessories to the relevant
recycling facilities.
Soil, which has been disturbed or new infi ll, subbase and blacktop, will have small voids or air pockets which, if not compacted, will
lead to one or more problems occurring.
1. As traffi c crosses the surface of an uncompacted area, the material is compressed. This leads to subsidence of the top surface
as the material fi lls the voids.
2. A similar situation occurs with static loads on uncompacted ground. The load (e.g. a building) will sink.
3. Materials with voids are more susceptible to water seepage, leading to erosion. Water ingress may also cause the soil to
expand during freezing temperatures and contract during dry spells. Expansion and contraction is a major cause of damage to
building foundations and normally leads to the structure requiring underpinning.
Compaction increases the density of the material and therefore increases its load bearing capacity. Reduces air voids and therefore
reduces the risk of subsidence, expansion and contraction, due to ingress of water.

Machine Description

7
6
550
700 / 800

Technical Data

Environment

Reasons For Compaction
8 4
1
9
945
60/80
1107
1150
3000
> 91.9
107
Component
Handle
Front cover
Main frame
Baseplate
Hand Grips
Engine
Flexible Mounts
Various Parts
12
1. Throttle lever.
2. Recoil Starter Handle.
3. Fuel Tank.
4. Lifting Point.
5. Handle Release Catch.
6. Forward / Reverse Control Handle.
7. Main Handle.
8. Belt Guard.
9. Key Start
15
15
60
70
Material
Steel
HDPE
Steel
Steel
Polyurethane Foam
Aluminium
Steel and Rubber
Steel and Aluminium