Sony Handycam DCR-TRV38E Mode D'emploi page 110

Table des Matières

Publicité

Recording video or TV
programmes
Recording video or TV
programmes
Before operation for connecting with the A/V
connecting cable
Set DISPLAY in
when using the A/V connecting cable. (The
default setting is LCD.)
The POWER switch should be set to
Operate by touching the panel.
(1) Insert the blank tape (or the tape you want to
record over) into your camcorder. If you are
recording the tape from the VCR, insert the
recorded tape into the VCR.
(2) Press FN and select PAGE3.
(3) Press REC CTRL.
(4) Press REC PAUSE.
(5) Press N on the VCR to start playback if you
record the tape from a VCR. Select a TV
programme if you record from a TV. The
picture from playback side appears on the
screen.
(6) Press REC START at the scene where you
want to start recording from.
When you have finished dubbing the
tape
Press x on your camcorder, and then press the
stop button on the VCR.
110
to LCD in the menu settings
Enregistrement de cassettes
vidéo ou d'émissions de
télévision
Enregistrement de cassettes
vidéo ou d'émissions de
télévision
Avant la copie avec le cordon de liaison audio/
vidéo
Réglez DISPLAY sur LCD dans
paramètres du menu lorsque vous utilisez un
cordon de liaison audio/vidéo. (Le réglage par
.
défaut est LCD.)
Le commutateur POWER doit être en position
.
Utilisez les touches de l'écran tactile.
(1) Insérez une cassette vierge (ou une cassette
que vous voulez réenregistrer) dans le
caméscope. Si vous voulez enregistrer depuis
un magnétoscope, insérez la cassette
enregistrée dans le magnétoscope.
(2) Appuyez sur FN et sélectionnez la PAGE3.
(3) Appuyez sur REC CTRL.
REC CTRL
RET.
REC
REC
PAUSE
START
(4) Appuyez sur REC PAUSE.
(5) Appuyer sur N du magnétoscope pour
commencer la lecture si vous enregistrez
depuis un magnétoscope. Sélectionnez une
émission de télévision si vous enregistrez
depuis la télévision. L'image apparaît à
l'écran.
(6) Appuyez sur REC START à l'endroit où vous
voulez commencer la copie.
Lorsque la copie est terminée
Appuyez sur x du caméscope, puis sur la touche
d'arrêt du magnétoscope.
des

Publicité

Table des Matières
loading

Table des Matières