Stihl FS 100 RX Notice D'emploi page 22

9
8
: Set the choke knob (8):
g
For cold start to
For warm start to e
even if engine has been running but
is still cold
: Press fuel pump bulb (9) at least five
times – even if the bulb is already
filled with fuel.
FS 100 RX
: Place the unit on the ground: It must
rest securely on the engine support
and deflector.
Check that the cutting tool is not
touching the ground or any other
obstacles.
: Make sure you have a firm footing.
: Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube!
: Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
: Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
English
21