Listening To The Radio - Sharp CD-CH1500W Mode D'emploi

Listening to the Radio

E-21 ENGLISH
Sound Control (See page 15.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING ( or ) button to tune in to the desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as required to tune in to the
desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
" When radio interference occurs, auto scan tuning may stop automatically at that
point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING (
To receive an FM stereo transmission:
Press the ST-MODE button on the remote control to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
FM Stereo Mode Indicator
FM stereo receiving indicator
" If the FM reception is weak, press the ST-MODE button. The "ST" indicator goes
out. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
01/1/25 E2.fm
or ) button again.