Table des Matières
Publicité
DK-CL8PH
Listening to the radio
ENGLISH
ON/STAND-BY
ALARM
RESET
■ Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNC. button repeatedly to select the Tuner
function.
3
Tune to the desired station.
Manual tuning:
Press the TUNING (
desired station.
Auto tuning:
When the TUNING (
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
●
Auto tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING (
again.
E-11
TUNING
or
) button to tune into the
or
) button is pressed for more
or
) button
■ Programming a station
You can store 40 FM stations in memory.
1
Perform steps 1 - 3 "Tuning" on page 11.
2
Press the CLOCK/MEM. button for more than 2
seconds to enter the preset tuning saving mode.
MON
3
Within 30 seconds, press the
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the CLOCK/MEM. button to
store that station in memory.
MON
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change
a preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.
or
button to
MON
Publicité
Table des Matières
