Remote Control; Battery Installation - Sharp CD-CH1500W Mode D'emploi

Remote Control

! Battery installation

1
Remove the battery cover.
2
Insert the supplied batteries according to the direction indicated in
the battery compartment.
" When inserting or removing the batteries, push them towards the
nal.
3
Replace the cover.
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the sensor on the ste-
reo system with a soft cloth.
" Exposing the sensor on the stereo system to strong light may interfere with opera-
tion. Change the lighting or the direction of the stereo system.
" Keep the remote control away from moisture, heat, shock, and vibrations.
E-13 ENGLISH
! Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
battery termi-
Remote sensor
0.2 m - 6 m (8" - 20')
01/1/25 E1.fm