Safety Instructions - HBM C16A Manuel D'emploi

Safety instructions

1 Safety instructions
4
Appropriate use
Transducers of the C16A type series are designed solely
for technical weighing applications within the application
limits detailed in the specifications. Any other use is not
appropriate.
Any person instructed to carry out installation, commis­
sioning or operation of the transducer must have read
and understood the Operating Manual and in particular
the technical safety instructions.
In the interests of safety, the transducer should only be
operated by qualified personnel and as described in the
Operating Manual. It is also essential to comply with the
legal and safety requirements for the application con­
cerned during use. The same applies to the use of ac­
cessories.
The transducer is not intended for use as a safety com­
ponent. Please also refer to the section: "Additional
safety precautions". Proper and safe operation requires
proper transportation, correct storage, siting and mount­
ing, and careful operation.
Operating conditions
S Please observe the permissible maximum values
stated in the specifications for:
- Limit load
- Limit load at max. eccentricity
- Limit lateral loading
- Breaking loads
- Temperature limits
- Limits of electrical loading capacity
A1460-4.0 HBM: public
C16A