Tips For Use And Maintenance; Tips For Safety - Bartscher 3702303 Mode D'emploi

•
Inspect the motor's power cable prior to every use. Energy may be lost if the cable
overheats or additional connections are performed. Have qualified technicians
replace a damaged cable.
•
By following the above recommendations the device's motor will offer maximum
efficiency.

5. Tips for use and maintenance

5.1 Tips for safety

CAUTION!
These instructions for use should be read carefully, as they contain important
information about safety and operation of the device.
Keep these instructions where they are easily accessible.
Improper installation or mistakes in use, maintenance and cleaning, as well as
any changes or modifications may result in malfunctioning, damage and injury.
•
Do not use accessories and spare parts that are not recommended by the manufacturer.
They may cause a threat to the user and others, or can result in damage to the device as
well as void the warranty.
•
Regularly inspect the power cable for damage. Never use the device if its power
cable is damaged. If it is damaged, have it replaced by an authorized service center
or qualified electrician.
•
Improper installations, mistakes in operation, maintenance and cleaning, as well as
changes and modifications may result in malfunction, damage and injury.
•
Before activating the device, remove all protective film and packing materia.
•
Never leave the device unattended when in use.
•
The device must be operated under a fume hood.
•
The device should only be operated by individuals who have read the instructions
concerning the device's construction, operation and maintenance, and have been
trained in use of the device.
•
Check the device's gas connections before each use.
- 35 -