Parts Of The Machine; Technical Data; Intended Use - Festool CLEANTEC CTM MIDI I Notice D'utilisation D'origine

Suitable for separation of dust
with an exposure limit value
greater than 0,1 mg/m
Do not dispose of it with domestic
waste.
Climbing prohibited
3

Parts of the machine

[1-2] Appliance socket
[1-3]
SysDoc
[1-4] Handle
[1-7]
Hose holder
[1-8] T-Loc lock for Systainers
[1-9] Dirt trap
4

Technical data

Mobile dust extractors
Power consumption
Max. electrical outlet module connected load
Max. suction capacity (air), extractor/turbine
Max. vacuum, turbine
Filter surface area
Suction hose
Mains power cable length
Sound pressure level as per EN 60335-2-69/uncertainty K
Hand-arm vibration value as per EN 60335-6-69/uncertainty K
Degree of protection
Container capacity
Dimensions L x W x H
Weight
5

Intended use

Mobile dust extractor suitable for
– extracting dust up to 0.1 mg/m³ according
to dust class M including wood and paint
dust,
– extracting water,
– for increased loads during commercial use,
[1-10]
[1-11]
3
[1-12] +
[1-13]
[1-14]
[1-15]
[1-16]
[1-17]
[1-18]
[1-19]
[1-20]
The specified figures appear at the beginning of
the operating manual.
GB 230 V/110 V
according to IEC/EN 60335-2-69.
Locking clip
On/off switch
Brake
Exhaust opening
Filter drawer
Dedusting
MAN button
Manual suction hose adjust­
ment (standby mode) or suction
power adjustment (extraction
mode)
Connection display
Connection button
EU, KR, CN
CH, DK
D 27/32 mm x 3.5 m-AS
CTM MIDI I
CTM MIDI I
CTM MIDI I
The user is liable for improper or non-in­
tended use.
English
350–1200 W
2200 W
1150 W
1610 W/770 W
130 m³/h / 222 m³/h
24,000 Pa
3508 cm²
7.5 m
70 dB(A)/3 dB
< 2.5 m/s² / 1.5 m/s²
IP X4
15 l
470 × 320 × 495 mm
11.3 kg
15