Symbols; Machine Features - Festool CTM 26 E Notice D'utilisation

– Check the plug and the cable regularly in order to prevent a hazard. In
the event of damage, these must be replaced by an authorised service
workshop only.
– Do not lift or transport the machine using a crane hook or lifting gear.
– This machine must not be used by people who might have a particularly
adverse reaction to an electric shock (e.g. people with cardiac pace­
makers), because the possibility of the machine building up a static
charge cannot be excluded.
– Use only the original Festool suction hose.
– Pay attention to the work environment and watch out for your own
safety and the safety of others when transporting or working with the
machine.
In this way, you can for example prevent tripping hazards caused by the
suction hose or mains cable.
– Keep packaging film away from children.
There is a risk of suffocation.
2

Symbols

Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and
safety notices!
Wear a dust mask.
Tip or advice
Handling instruction
Warning! The machine may contain
hazardous dust!
Do not dispose of as domestic waste.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
3

Machine features

[1-1] Sealing plug
[1-2] Intake opening
[1-3] Module slot (compressed air module
for CTM 36 E LE, CTM 36 E LE AC,
CTM 48 E LE, CTM 48 E LE AC)
[1-4] Appliance socket
[1-5]
Hose store
[1-6] Handle
[1-7] SysDoc
[1-8]
Automatic cleaning (only versions
with AutoClean)
[1-9] Hose diameter setting
[1-10] Suction power adjuster
[1-11] Switch
[1-12] Locking clip
[1-13] Dust container
[1-15] Brake
The specified illustrations appear at the begin­
ning of the Operating Instructions.
English
17