Symbols; Intended Use - Festool CTLC MINI I Notice D'utilisation D'origine

English
ventative safety measures reduce the risk of unintentionally starting the
device.
2

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
warnings.
Read the operating instructions and
safety instructions.
Wear a dust mask.
Suitable for separation of dust
with an exposure limit value
greater than 1 mg/m
Suitable for separation of dust
with an exposure limit value
greater than 0,1 mg/m
WARNING! The machine may contain
hazardous dust!
Do not climb on the unit
Inserting the battery pack
Removing the battery pack
Tip or advice
Handling instruction
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
20
3
CTLC MINI I
CTLC MIDI I
Cordless mobile dust extractor suitable
–
–
–
–
3
3
CTMC MIDI I
Cordless mobile dust extractor suitable
–
–
–
–
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 17.2

Intended use

for extracting dust up to 1 mg/m³ corre­
sponding to dust class L,
for absorbing water,
for increased loads during commercial use
in accordance with IEC/EN 60335-2-69,
for use with BP Festool battery packs of the
same voltage class which have been ap­
proved for this cordless mobile dust ex­
tractor.
for extracting dust up to 0.1 mg/m³ accord­
ing to dust class M including wood and
paint dust,
for absorbing water,
for increased loads during commercial use
in accordance with IEC/EN 60335-2-69,
for use with BP Festool battery packs of the
same voltage class which have been ap­
proved for this cordless mobile dust ex­
tractor.
The user is liable for improper or non-in­
tended use.