Remote Control - Festool CTLC MINI I Notice D'utilisation D'origine

CAUTION
Hazardous dust
Damage to the respiratory passage
► After extracting wet materials, remove the
wet filter and replace it with the main filter
for dry materials.
CAUTION
Escaping foam and liquids
► Switch off and empty the machine immedi­
ately.
11.3 Exhaust-air outlet
CAUTION
Hazardous dust
Damage to the respiratory passage
► Do not blow off any dust!
The exhaust-air outlet offers the option of di­
verting the exhaust air outside a building using
the suction hose.
► Open the grille in front of the exhaust-air
outlet [1-8].
► Insert the suction hose in the exhaust-air
outlet [1-8].
11.4 Cleaning the main filter and filter bag
manually
► In standby mode, press the MAN but­
ton [1-13].
► Set the suction power to the maximum set­
ting [1-14].
► Close the suction hose manually while at
the same time briefly pressing down the
cleaning lever [1-5] three times.
11.5 Changing the filter bag with minimal
dust
► Open the locking clips and remove the top
section of the machine [2].
► Pull the tab on the filter bag until the filter
bag opening is fully closed.
The filter bag is now securely closed and can be
removed.
► Fit the top section of the machine and close
the locking clips.
11.6 Changing the main filter [6]
► Remove the used main filter [1-6].
► Dispose of the used main filter in accord­
ance with statutory regulations.
► Insert the new main filter.
PO numbers for accessories, filters and
consumables in the Festool catalogue or
online at "www.festool.com".
NOTICE
Damage to the motor
► Never extract material without a main filter
or with a damaged main filter, as this can
damage the motor.
11.7 After finishing work
► Switch off the cordless mobile dust extrac­
tor.
► Remove the battery pack.
Note: Keep the unused battery pack away
from metal objects (e.g. nails, screws, keys,
paper clips, etc.) as these may cause bridg­
ing of the contacts.
► Empty the dirt trap.
► Place the suction hose in the sealable hose
holder [7].
► Vacuum and wipe the inside and outside of
the cordless mobile dust extractor to clean
it.
► Place the cordless mobile dust extractor in
a dry room inaccessible to unauthorised
users.
The lid of the hose holder [1-3] also serves
as a storage area for tools.

12 Remote control

12.1 Intended use of remote control CT-F I
The remote control can manually start / stop a
connected cordless mobile dust extractor.
The user is liable for improper or non-in­
tended use.
12.2 Assembly
Attach the remote control [1-18] to the suction
hose using the corresponding fastening
strap [1-23].
To connect the remote control and the
cordless mobile dust extractor, see sec­
tion 9.2.
12.3 LED indicator [1-20]
The remote control's LED indicator displays,
the charge status of the remote control in addi­
tion to the Bluetooth ®
English
functionality:
25