Safety Instructions; Symbols; Machine Features - Festool CTL 26 E Notice D'utilisation D'origine

English
Contents
1 Safety instructions.................................... 12
2 Symbols..................................................... 12
3 Machine features...................................... 12
4 Technical data........................................... 13
5 Intended use..............................................14
6 Commissioning..........................................14
7 Settings......................................................15
8 Working..................................................... 15
9 Service and maintenance..........................16
10 Environment.............................................. 16
1

Safety instructions

WARNING! Read all safety warnings, in­
structions, illustrations and specifications
provided with this tool. Failure to follow all in­
structions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
- This appliance must not be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge. Children need
to be supervised to ensure they do not play
with the appliance.
WARNING! machine may contain hazard­
-
ous dust. Only authorised qualified special­
ists with suitable protective equipment may
perform maintenance, empty the container
and change the filter.
- Always operate with the filter system in­
stalled!
Risk of explosion and fire: Do not absorb:
-
- Sparks or hot dust;
- Combustible or explosive materials (e.g.
magnesium, aluminium, petrol, diluting
agents);
- Aggressive materials (e.g. acid, alkaline
solutions, solvents);
- Chemically reactive materials, which
lead to the generation of heat, acids/
bases, gases, etc. (e.g. reactive 2-compo­
nent materials, aluminium and water).
- Observe all national safety regulations as
well as the material manufacturer's speci­
fications!
12
- Always use suitable protective equipment!
- If intact following a visual inspection, work
in a dry environment according to instruc­
tions!
- Always use the socket on the machine for
the purpose specified!
- Check the plug and the cable regularly and
should either become damaged, in order to
avoid a hazard, have them replaced by an
authorised after-sales service workshop.
- Do not lift or transport using a crane hook
or lifting gear!
2

Symbols

Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and
safety notices!
Wear a dust mask.
Tip or advice
Handling instruction
Warning! The machine may contain
hazardous dust!
Do not dispose of as domestic waste.
3

Machine features

[1-1]
Intake opening
[1-2] Module slot
(compressed air module for CTL
36/48 E LE, CTL 36/48 E LE AC, sock­
et module for CTL 26 E SD)
[1-3] Appliance socket
[1-4] Hose store
[1-5] Handle
[1-6] SysDoc
[1-7]
Automatic cleaning (only versions
with AutoClean)
[1-8] Switch
[1-9]
Suction power adjuster