Intended Use; Special Safety Instructions; General Power Tool Safety Warnings - Ayce YS-1061 Notice Originale

INTENDED USE

The machine is intended for driving in and loosening screws and bolts as well as
for tightening and loosening nuts within the respective range of dimension.

SPECIAL SAFETY INSTRUCTIONS

Wear ear protection when using the cordless screwdriver. Exposure to the noise
can cause hearing loss. Hold power tool by insulated gripping surfaces, when
performing an operation where the drilling accessory may contact hidden
wiring or its own cord. Drilling accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an
electric shock.
!
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contain chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: lead from lead-based paints,
WARNING
crystalline silica from bricks and cement and other masonry
products, and arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.

General Power Tool Safety Warnings

!
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/
or serious injury. Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers to your
WARNING
mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1) General Power Tool Safety Warnings - Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.