Intended Use; Special Safety Instructions - Ayce 1512 Traduction De La Notice Originale

All manuals and user guides at all-guides.com

INTENDED USE

The machine is intended for impact drilling in brick, concrete and stone as well as for
drilling in wood, metal and plastic with suitable attachments.

SPECIAL SAFETY INSTRUCTIONS

1. Wear ear protectors when impact drilling. Exposure to noise can cause
hearing loss.
2. Use auxiliary handles supplied with the tool. Loss of control can cause
personal injury.
3. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
4. If possible, always use clamps or a vice to hold your work.
5. Always switch off the drill, before putting it down.
6. Ensure that the lighting is adequate.
7. Keep the area free of tripping hazards.
8. Only use accessory bits in good condition.
9. Before drilling, check that there is sufficient clearance for the drill bit under
the work-piece.
10. Do not touch the bit after operation. It will be very hot.
11. Keep your hands away from under the work-piece.
12. Never use your hands to remove dust, chips or waste close by the bit.
13. Rags, cloths, cord, string and the like should never be left around the work
area.
14. Support the work properly.
15. If you are interrupted when operating the drill, complete the process and
switch off before looking up.
16. Periodically check that all nuts, bolts and other fixings are properly tightened.
When using the drill, use safety equipment including safety glasses or shield,
hearing protection, and protective clothing including safety gloves. Wear a
dust mask if the drilling operation creates dust.
17. Children and frail people must not use this tool. Children should be
supervised at all times if they are in the area in which the tool is being used.
It is also imperative that you observe the accident prevention regulations in
force in your area.
18. Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors.