Ayce 1512 Traduction De La Notice Originale page 79

All manuals and user guides at all-guides.com
e. Selecting the impact/drill mode (Fig.5)
Fig. 5
f. Power on indicator (Fig.6)
Fig. 6
g. Dual range gear switch (Fig.7)
Fig. 7
The impact/drill switch should be set
according to the type of action required.
The tool has two settings:
1. Drill mode : Use the standard drill
bits for drilling into wood and metal.
2. Impact mode : Use the masonry
drill bits for drilling into stone and
masonry.
Your tool has a "power on indicator"
light. This light is always on when the
tool is plugged into a power source.
1. Adjust speed by selecting the dual
range gear switch to set desired
speed.
2. To select the low speed, high torque
setting, turn the tool off and let the
motor come to a complete standstill.
Push the dual range gear switch to
position"I".
3. To select high speed, low torque, turn
the gear switch to position "II".
78 | 79 GB