Ayce 1512 Traduction De La Notice Originale page 78

All manuals and user guides at all-guides.com
b. Forward /reverse adjustment (Fig.2)
Fig. 2
c. Auxiliary handle (Fig.3)
Fig. 3
d. Depth gauge (Fig.4)
Fig. 4
1. For forward (clockwise) rotation,
push the forward /reverse switch to
the left position.
2. For reverse (counterclockwise)
rotation, push the forward/reverse
switch to the right position.
• An auxiliary handle is packed with the
tool for ease of operation and to help
prevent loss of control. The handle
can be rotated 360° and it can also be
mounted on the opposite side for left
hand use.
1. Loosen the handle by turning the
handle counterclockwise.
2. Rotate the handle to the desired
operating position.
3. Securely tighten by turning the handle
clockwise.
1. To change the position of the depth
gauge, turn the depth gauge knob
counterclockwise until the depth
gauge is loose enough to slide in the
hole.
2. Set the depth, checking the depth
with a steel ruler for most accurate
measurement and then turn the knob
clockwise to tighten the depth gauge
in the required position.