Ayce 1512 Traduction De La Notice Originale page 77

All manuals and user guides at all-guides.com
OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. They should fit with the machine and your
purpose.
2. Functions
a. Install the bit (Fig. 1)
!
Always wear sturdy gloves when handling or changing drill bits as they
can be very sharp.
WARNING
Fig. 1
When selecting a drill bit, use the right
type for your job. For best performance,
always use sharp drill bit.
1. To open the chuck jaws, hold its
collar while turning the sleeve in
the counterclockwise direction.
Insert the drill bit deeply into the
chuck, and then center the bit in the
chuck jaws.
2. To close the chuck jaws, hold the
collar while turning the sleeve in
the clockwise direction. Tighten
securely.
3. To remove the drill bit, reverse the
direction.
NOTE: The chucks of reversible drills are
always fixed by a screw with a left hand
thread. The screw must be loosed before
the chuck can be removed if necessary.
To loosen the screw, turn it in a clockwise
direction.
76 | 77 GB