Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
b. Charging the battery with USB port (fig.2)
fig. 2
c. Charging indication (fig.3)
Arrow lights
fig. 3
Arrow
lights
flashing
Action
Charging is in process
- If you are working with a PC, notebook or other
devices which have a USB port, then the USB port
is applicable for charging your tool.
- Insert the USB plug (a) of USB line into the USB
port.
- Insert the phone jack (b) of USB line into the
charging socket (6) on the tool. Then the charging
is in process.
- When charging is beginning, the two arrow lights
on top of the tool will turn on to flash.
- When the battery has been 90% charged, the
arrow lights will stop flashing and keep
illuminating. It will take about 20min to finish
charging.
- After charging is complete, the arrow lights will
turn off.
on
The battery has
been 90% charged.
Charging will finish
within 20min.
|
70
| 71
off
Charging is
complete
GB
Publicité
Table des Matières
