Publicité
Les langues disponibles
Les langues disponibles
Operating the chronograph
20 | 21
Start: Start the chronograph by pressing the start-stop
button.
Stop: Stop the chronograph by pressing the start-stop
button again.
Resetting: Press the reset button. This will cause all the
chronograph hands to fly back to the zero position.
Aggregate time recording: You can add the stop times
together by pressing the start-stop button again, instead
of the reset button, after taking the first measurement.
Seconds counter: The graduation for the central
seconds stop hand is situated at the edge of the dial.
Minutes counter: The 30-minute graduation with a slow
jumping hand is situated at 12.00 on the measurement
indicator. This hand makes two complete revolutions in
one hour.
Hours counter: The 12-hour graduation with short lines
for the
1
/
-hour indication with a continuous hand is
2
situated at 6.00 on the measurement indicator.
Reading the time in the dark
The dial and the hour and minute hands of your watch
are provided with luminous elements that permit the time
to be read easily, even in total darkness. The distinctive
triangle at 12.00 acts as a reference point.
Publicité
