Publicité
Les langues disponibles
Les langues disponibles
Setting your watch correctly
You can set your watch correctly as follows:
• Release the crown by turning it to the left.
• Wind the movement until it is fully wound (ca. 30 rota-
tions of the crown).
• Pull out the crown to position 1.
• Turning the crown to the right will change the date
indicator in steps. Set it to yesterday's date.
• Turning the crown to the left will change the day indi-
cator in steps. Set it to yesterday's day.
• Pull out the crown to position 2, which will stop the
movement.
• Turn the hands forwards until the date indicator
changes to today's day. The hands will now be set
between 0.00 and 1.00.
• Now turn the hands forwards to the precise time;
you will have to move the hands past 12.00 (noon) once
again in the afternoon.
• Push in the crown to position 0 to restart the move-
ment.
• Now push in the crown to position X and secure it by
turning it to the right at the same time.
Important: Although the watch is still water-resistant in
positions 0, 1 and 2, the crown must always be screwed in
again (position X) for normal use.
Publicité
