Publicité
Les langues disponibles
Les langues disponibles
Functions of the crown
X
0
Normal position
This watch has a screw-in crown. The screw-in connec-
tion (normal position, position X) prevents unintentional
adjustment of the time or the date, and the watch case
has double protection against penetrating water. To
release the secure crown, unscrew it by rotating it to the
left, where it automatically assumes position 0, the wind-
ing position. By depressing the crown in position X and
rotating it to the right at the same time, it is screwed
down firmly again and secured.
Winding position
In the winding position (position 0), you can also wind
the automatic movement by hand. The movement will start
after only a few revolutions of the crown. However, it is
better to wind the movement fully with about 30 revolutions
of the crown, as maximum accuracy and a power reserve
of about 44 hours will then be assured, even after taking off
the watch.
X Normal position
0 Winding position
1 Date and day setting
1
2
2 Time setting
(screwed in)
Publicité
