Chronothermostat - Ravelli MIA 90 Manuel De L'utilisateur

Chronothermostat

The PROGRAMMABLE THERMOSTAT function is only active in HEATING mode.
With the Programmable thermostat function, you can set the cooker to switch on and off automatically within four independent time
intervals (SET CRONO 1-2-3-4).
Below are given the steps for accessing the relative menu starting from Stand-By mode.
Menu access
SETTINGS
1
4
5
By pressing the Increment key you can change each value and, at step 3, enable the days of the week;
By pressing the Increment key you can change each value and, at step 3, enable the days of the week;
Press "confirm" to confirm the settings and switch to the next value;
Press the "back" button to return to the CHRONO-THERMOSTAT page.
As per the above example, it has been set as CRONO 1 the switch-on at 08:30 and switch-off at 21.30 from MONDAY to
FRIDAY at operating power 5 with room temperature set to 21°C. Follow the same steps to set the programs 2-3-4.
To exit the CHRONO-THERMOSTAT function and return to Stand-by page, press the button repeatedly.
With the cooker off, the switch-on control set by the programmable thermostat remaisn active even in Cooking mode; in this case,
the heating mode is enabled automatically.
With the cooker switched on, in COOKING mode, or off, only with the grill switched on, the ON/OFF controls set by the programmable
thermostat are not taken into account.
User manual MIA 90
Press the key
"confirm"
to access the
USER page
2
3
6
Press the key
several times
to quickly switch to
CRONO-THERMOSTAT.
1 Set switch-on program
2
Set switch-off program
3 Day of the week with active program
4
Number of "chrono" program (1-2-3-4)
5
Setting the power upon programming
6 Setting ambient temperature
Vers. 1 du 20/10/16
EN
Page126