BEKA HAMAX 2 Mode D'emploi page 31

Change of the cartridge adapter
If you want use another type of cartridge you can order a corresponding adapter as spare part:
Adapter 2576GK0001 -
Adapter 2576GK0003 -
Adapter 2576GK0008 - for cartridge type Ra:
To change the adapter, unscrew and remove the four fastening screws opposite with a 4 mm hexagon ke (Fig. 7: item 1).
Fig. 7:
After that you can pull out the adapter easily from the pump casing and change it. Before you insert the new adapter make
sure that the seals in the pump casing are already okay. In cause of damage replace it. To assembly the cartridge adapter put
it into the pump casing and screw it with the removed screws again (Fig. 7: item 1). Take care that the inspection windows in
the cartridge adapter and the pump casing look right (Fig. 7: item 2)
for cartridge type S:
for cartridge type L:
1
...a product of BEKA
Adapter 2576GK0002 - for cartridge type F:
Adapter 2576GK0004 - for cartridge type
2
.
GB
R:
31
y